The outline I'm doing is 20 pages long. Each field is a page a piece. When I slide/printing it in its own print layout it leaves a large space. Is their a way to get the space smaller. "I tried pulling the body up as closed to the bottom field as possible."

Make sure that in the sliding/printing options, that you have also checked "reduce size of enclosing part".

I reduced the enclosed part also. What is the space betweem fields based on? What determines the size. I will show you the size of the space below:

Field 1: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Field 2: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

From my experience, if you have 1 inch between the bottom of one field, and the top of the next one, then when the top field shrinks, the bottom one should move up to maintain the same 1 inch space. But, sliding and shrinking also seems to rely on a lot of black magic. As someone else recently pointed out, it sometimes makes a difference whether you set the sliding on each field one at a time, or whether you select them all and then set their sliding all together. You could try experimenting with that.

Thank you, that sounds a lot more helpful.