Welcome To FMForums

Welcome to our community, full of great ideas on developing your FileMaker solutions effectively,
for peer-to-peer support of the FileMaker Platform and related products and services.

Register and join the conversation!

Sign In

or

Sign Up

Blogs

Featured Entries

A Conversation About '2 Factor Authentication'

By Josh Ormond February 8, 2016

[ Edit: 3/16/2016 - With the help of some other people, we have been able to recover, or recreate some of the original images from original thread. ] Security is always a big topic when it involves data, or people, or possessions. Recently, over on the FileMaker Community, there was a very beneficial discussion regarding security. Unfortunately, that discussion was the victim of a necessary action...and was deleted. It was deleted, because the discussion was tied to a video that, as was det
- 1 comment
- 5,557 views
Hacking Your Own FileMaker Platform Solutions

By Steven H. Blackwell April 7, 2016

Hacking Your Own FileMaker Platform Solutions Should FileMaker Platform developers mount hacking attacks on their own solutions? At first glance, this may seem an odd question. But I believe that the answer is “Yes, we should.” Consider this. As developers we see our solutions from a totally different perspective than Threat Agents see them. Without practicing our own hacking skills, we can become blind to the vulnerabilities a Threat Agent can exploit to compromise the Confidentiality
- 1 comment
- 5,515 views

FMRPC | FileMaker Remote Procedure Call | Install | Setup Demo

<p><a href="/blog/FMRPC-How-Easy-Is-Installation-And-Setup"><br /><h1>FMRPC: How Easy is Installation and Setup?</h1> <p></p></a></p> <p><a href="/images/Blog/FMRPC_Banner_v1_cropped600x225.jpg" align="left"><img width="400" height="150" src="/images/Blog/FMRPC_Banner_v1_cropped600x225.jpg" /></a></p> <p>FMRPC makes FileMaker Pro and Go perform much faster over the Internet, and it lets FileMaker Go r

Skeleton Key

September 12, 2013

Default Security Settings in FileMaker Pro

From time to time people ask me why the Privilege Set bits in FileMaker Pro are all turned OFF by default. Would it not be easier and better for security purposes, the questions go, if all these were turned ON instead? The answer is No; here is why. First, some history. Prior to the introduction of FileMakerÂ® Pro 7 in March 2004, all of the privilegesâas they then existedâwere turned on by default. Developers then had to wade through a veritable sea of settings and options to limit acc

Steven H. Blackwell

September 10, 2013

Post FM Academy Webinar Recap - Keep It Clean: Using the Database Design Report to Assist in Cleaning Your Database

<p><a href="/blog/Post-FM-Academy-Webinar-Recap-Keep-It-Clean-Using-The-Database-Design-Report-To-Assist-In-Cleaning-Your-Database"><br /><h1>Post FM Academy Webinar Recap - Keep It Clean: Using the Database Design Report to Assist in Cleaning Your Database</h1> <p></p></a></p> <p><center><a href="/images/Blog/FMA_AugustImage_2013-07-19-150x150.jpg" align="right"><img width="150" height="150" src="/images/Blog/FMA_Aug

Skeleton Key

September 3, 2013

FMRPC | FileMaker Procedure Remote Call | Software Update |Discount

<p><a href="/blog/FMRPC-Update-v1.02-Now-Available-20%-Discount-Price-Reduction-Ends-Saturday-August-31st"><br /><h1>FMRPC Update: v1.02 Now Available & 20% Discount Price Reduction Ends Saturday, August 31st! </h1> <p></p></a></p> <p><a href="/images/Blog/FMRPC_Banner_v1_cropped600x225.jpg" align="left"><img width="400" height="150" src="/images/Blog/FMRPC_Banner_v1_cropped600x225.jpg" /></a></p>

Skeleton Key

August 27, 2013

JavaScript is Literature is JavaScript

This is what finally got me to read Roberto Bolaño?! Angus Croll: fantastic. The post JavaScript is Literature is JavaScript appeared first on SeedCode. <a href="http://www.seedcode.com/javascript-literature-javascript/" rel='nofollow external'>Source</a>

John Sindelar

August 26, 2013

First things “first”

Back from DevCon and refocussing, as I think we all are. I’m trying the “desired outcomes” chart again (worked well when I worked it) and am reminded of Benjamin Franklin’s plan for each day: Wish I remembered where I snapped this. Pretty cool. The days when I do the most important thing before I start reacting to email are by far the most productive enjoyable. The “desired outcomes” chart is here. The post First things “first” appeared first on SeedCode. <a href="http://www.seedcode.

John Sindelar

August 23, 2013

We Love Clients Like Terry!

We are all used to everyone thinking what we do is “easy”. “Shouldn’t take you more than a couple of minutes” is a familiar dictation from some of our self-declared savvy patrons who have voiced in on a chore or task that we know consists of hours and not minutes. So it is refreshing when you get those far and few between letters from a first-rate client who has a sense of humor, has their feet firmly planted on the ground, and are plugged into reality. Since this was such a great communication

eXcelisys

August 20, 2013

FM Academy Webinar - Keep It Clean: Using the Database Design Report to Assist in Cleaning Your Database

<p><a href="/blog/FM-Academy-Webinar-Keep-It-Clean-Using-The-Database-Design-Report-To-Assist-In-Cleaning-Your-Database"><br /><h1>FM Academy Webinar - Keep It Clean: Using the Database Design Report to Assist in Cleaning Your Database</h1> <p></p></a></p> <p><a href="/images/Blog/FMA_AugustImage_2013-07-19-150x150.jpg" align="right"><img width="150" height="150" src="/images/Blog/FMA_AugustImage_2013-07-19-150x150.jpg" /&g

Skeleton Key

August 13, 2013

Benford’s Law

A common exercise in freshman courses on statistics and probability is to divide the students into two groups, let’s call them A and B. Each student in group A is instructed to flip a coin 100 times and record the resulting sequence of heads and tails. Each student in group B is instructed to merely […] <a href="http://www.filemakerhacks.com/?p=8423" rel='nofollow external'>Source</a>

Kevin Frank

August 12, 2013

Terminal Server | Citrix XenApp | Group Policy

<p><a href="/blog/Managing-FileMaker-Pro-Preferences-Using-Group-Policies"><br /><h1>Managing FileMaker Pro Preferences Using Group Policies</h1> <p></p></a></p> <p><a href="/images/Blog/GPOplusFMP%20copy.jpg" align="right"><img width="350" height="146" src="/images/Blog/GPOplusFMP%20copy.jpg" /></a></p> <p><i>The following is a shared blog from Oliver Block, <a href="http://www.brightsourcei

Skeleton Key

August 8, 2013

20% Off Sale

We’re offering 20% off on all products through August 22nd as part of DevCon 2013. If you need some inspiration, all our FileMaker Syncing Products are on sale: you know you’ll need ‘em sooner or later. You’ll see the 20% taken off as soon as you add an item to your cart. Enjoy! By the way, neither John nor Jason are speaking at the conference this year. We wanted to take the summer to focus on shipping a few things–like SQLx, the new faster GoZync 4, and the brand new SeedCode Subscribe–al

John Sindelar

August 6, 2013

FileMaker Pro Recursion PT 3 – A Wrinkle in Timeliness: The Final Reckoning

FileMaker Pro Recursion PT 3 - A Wrinkle in Timeliness: The Final Reckoning, By Andy Persons In my first post of this three part series, I posed a challenge: how do you update hundreds or thousands of tasks interconnected with tens of thousands of connections? In my second installment, we explored a possible solution: recursively looping through each task from the end-level tasks, tracing each one to its source, then returning back down the stack and updating the dates along the way. Howe

eXcelisys

August 5, 2013

FileMaker Pro | Script | Record Navigation

<p><a href="/blog/Quickly-Navigating-to-a-Specific-Record-Within-a-Found-Set"><br /><h1>Quickly Navigating to a Specific Record Within a Found Set</h1> <p></p></a></p> <p><a href="/images/Blog/BullsEye.png" align="right"><img width="100" height="95" src="/images/Blog/BullsEye.png" /></a></p> <p>Recently I needed to have a FileMaker Pro 12 script navigate to a particular record within the found set aft

Skeleton Key

August 1, 2013

FM Starting Point 3.0v10 Released!

FM Starting Point is a completely FREE FileMaker template designed for use with FileMaker® Pro 12, and is focused on small businesses, work groups, and non-profit organizations. These templates were built with the experience gained from working with these target groups for over 22 years. This updated version includes: -Usability Adjustments -Workflow Improvements -Various Bug Fixes Feel free to download it now! http://fmstartingpoint.com/ Source

Richard Carlton

August 1, 2013

Simpler iCal Integration: SeedCode Subscribe

Ever since we built our first calendar in FileMaker 5, we’ve been publishing that data to iCal (and then to Google Calendar) one way or another. We’ve always wanted something simpler, and now we have it. SeedCode Subscribe is the simplest way we’ve found to get your FileMaker data into iCal, Google Calendar, and the calendars on your iPhone and iPad. Please check it out here, where you’ll find a short video showing how easy it is to get started (you can test your first calendars without even i

John Sindelar

July 30, 2013

FileMaker Security Survey Reveals Interest and Some Confusion

FileMaker Security Survey Reveals Interest and Some Confusion During early and mid-July, I posted on FM Forums a multi-question survey asking people about their use of various FileMaker product security features. I also asked for any comments or for any recommendations they might have for enhancing product security features.  The results are interesting. They reveal a high level of use of many security features; they also indicate some areas of confusion about how security features in FileMa

Steven H. Blackwell

July 30, 2013

ForgetSummary()

One of my favorite FileMaker functions is GetSummary; I use it frequently, and it had never occurred to me that there might be any alternative. Recently, however, Mikhail Edoshin pointed out on the FMPExperts list that GetLayoutObjectAttribute can serve as a viable replacement, like so: I threw together a demo file, ForgetSummary, to compare the [...] <a href="http://www.filemakerhacks.com/?p=8378" rel='nofollow external'>Source</a>

Kevin Frank

July 28, 2013

Faster: GoZync 4

We’ve just released the newest version of GoZync and it makes a lot of things easier for developers using sync as part of their workflow. You’ll find it easier to sync calc fields, add business logic inside the sync, and get GoZync added to your files more quickly. And though we’re still coding for transparency and dependability vs speed, the sync itself is also faster: often 4x faster. If you’ve looked at GoZync before, or are using version 3, this video gives you a quick overview of the new

John Sindelar

July 26, 2013

New SQLexplorer

Jason has just completed a major new version of SQLexplorer that makes it easier for beginners and pros alike to write better queries. If you haven’t used SQLexplorer before, it writes FileMaker SQL queries for you as you fill out a simple form using FileMaker terms your familiar with (sorts, relationships, etc). You can then test your query right in SQLexplorer before copying and pasting it into your solution. Queries are clearly commented and abstracted to survive field renaming. I can tell

John Sindelar

July 22, 2013

FileMaker Pro Development is Not ALL Fun and Games, Or Is It!?

Serious FileMaker Pro® Development. Tic-Tac-Toe: A Challenge of Unspoken Requirements In a recent FileMaker Pro development stress-relieving exercise, our FileMaker Pro developers were offered a simple challenge to create a Tic-Tac-Toe game using FileMaker Pro while following a few basic requirements: The Quality must be apparent in the user interface. It doesn’t have to look stunning…just clean, consistent, fun and professional. Creativity should be apparent behind the scenes. Step out o

eXcelisys

July 18, 2013

PDF Catalog with Table of Contents

Recently I was asked by a client whether we could produce a PDF catalog from his company’s database, with products grouped by manufacturer. Me: “Of course, this is FileMaker.” Him: “Can it have a table of contents?” Me: “Yeah, sure, no problem.” Actually, it took some trial and error, but we got there eventually… …and [...] <a href="http://www.filemakerhacks.com/?p=8212" rel='nofollow external'>Source</a>

Kevin Frank

July 14, 2013

FMRPC | FileMaker Remote Procedure Call | Alternate Demo File

<p><a href="/blog/FMRPC-Alternate-Demo-File-And-A-Performance-Tip"><br /><h1>FMRPC: Alternate Demo file and a performance tip</h1> <p></p></a><br /><a href="/images/FMRPC.png" align="right"><img width="150" height="42" src="/images/FMRPC.png" /></a></p> <p>We've had a number of requests for the 'Teaser' file I used in the YouTube videos where we showcased <a href="/FMRPC"><b>FMRPC</b></a&

Skeleton Key

July 12, 2013

Protecting Data | Cloud | Integrity | FM Academy

<p><a href="/blog/FM-Academy-Webinar-Protecting-Your-Users-And-Data-In-The-Cloud"><br /><h1>FM Academy Webinar - Protecting Your Users and Data in the Cloud</h1> <p></p></a></p> <p><a href="/images/Blog/iStock_000020688207_ExtraSmall-150x150.jpg" align="right"><img width="150" height="150" src="/images/Blog/iStock_000020688207_ExtraSmall-150x150.jpg" /></a></p> <p>Join us Wednesday, July 17 for a free

Skeleton Key

July 11, 2013