FileMaker General Discussions
Older discussion forums for previous versions of FileMaker
-
What version of Filemaker 4 do I need to get ODBC support?
-
- 2 replies
- 900 views
-
-
I have a client who has a Power Mac G4 Dual Processor with FileMaker 5.0 Server. Their are 11 databases and 10 clients connecting with varying Mac computers and OS'. They are using Retrospect remote to backup up the scheduled backups of the database created by the FileMaker Server schedular. They have an APC battery backup with a USB connection to the computer. The G4 has OS 9.2.2 and X on it. They boot in 9.2.2. The network is 10/100xt ethernet with TCP/IP. In the Control Panel Energy Saver, I have set the sleep mode to NEVER. Situation: Every morning when they come in the database are not accessible from open host - the computer does not show up. They have to r…
-
- 1 reply
- 636 views
-
-
I have a solution that is printing out invoices the solution is distributed in run-time. I would like to setup so the user can change the layout of the invoice, but in run-time is this locked so in this case I would need to sell FMP to the user as well. My questions is can a normal user handle to make up a new layout for the invoice or how do you guys do this. It feels scaring to allow users in to layout mode god know what they can do in there or can I look out same futures so they can
-
- 1 reply
- 673 views
-
-
-
I am using Fm 5 unlimited with 2 databases connected via host to a fm 5.5 server with TCP/IP connections on. This is a Mac network that both machines use OS 9.2.2 About every 15-24 hours the databases close. This just started after 6 months of working with no problems. I have turned on the disconnect idle guest and turned off with no change in the results. Any ideas on how to fix this? I am about to reformat machiens and reinstall software and then replace hubs/switches.
-
- 3 replies
- 1.1k views
-
-
I am tryign to test a FMWSC (MS IIS on W2K Server) + FMPro Unlimited 6 + FileMaker Server 5.5 combination, each one is on different machines (maybe FMWSC and FMU on the same, is this good?). There will be, of course, one or more FM pro clients accessing FM Server. I visited http://localhost/FMPro?config and followed "Configure by Host", added one host and several dbs. And now how can i connect to the FMWSC to see my dbs? I want to open up IIS server machine to the internet via a firewall. What's the next step ? jitCoder, aka Marashi
-
- 2 replies
- 1.1k views
-
-
My apologies if I am out of line posting this here, but I thought some might like to know. A few people, myself included, are created a dedicated FileMaker chatroom on the IRC chat network. If you don't know what IRC is, you can download a client to use it at http://www.ircle.com or http://www.snak.com for Macintosh users, or http://www.mirc.com for Windows users. Use your IRC Client to connect to a server on the EFNet irc network (for example: irc.prison.net, or irc.vrfx.com) and join channel "#filemaker". To do this you can usually type "/join #filemaker" after you have connected to IRC.
-
- 0 replies
- 958 views
-
-
Dear sirs: I wouls like your opinion, I have a request to port a FileMaker solution that handles the complete movement and operations of a national airline, to work via Web. Can this be done?. The real problem is mastering FM, or mastering software such as GoLive, DreamWeaver, etc?, or is a matter of knowing CDML (. Where can I find information?. Replies welcome.
-
- 9 replies
- 2.2k views
-
-
In layout mode, Layout pull down menu, Set layout order command is dehighlighted. What do I need to do to get it highlighted so I can change the order of the 7 different layouts? Is the layout first on the layout menu the one that is open when the program starts up? Thanks Andy
-
- 2 replies
- 1.1k views
-
-
I know this question will sound pretty dumb, but I have to ask. When a field is defined as unstored ("A calculation field with a result that is only calculated when the value is needed" per FileMaker documentation), once the calculation does take place is the value literally stored, or is it only calculated and displayed whenever that specific record is viewed (thus saving storage space on disk)? Thanks. -- Pat
-
- 2 replies
- 695 views
-
-
What scenarios could cause data loss? I have a user who is telling me that a record keeps losing data that he has updated. I cannot for the life of me think of a reason that this could happen when no one else has a problem. The one situation I can think of it that the user is updating a record and losing his connection to the database before it has been saved. I am thinking this because he has also complained that he keeps getting dropped from the file.
-
- 4 replies
- 995 views
-
-
Dear All, I would like to know that there is a case which I want to work on a specific layout and field definition. My co-worker can not access to that layout. How can it be the case that I can work and my co-worker can access at the same time. IS it Virtual Private Network or Citrix Metaframe the solution??? Someone have experience using Citrix and Filemaker could tell me ...I can work and edit .After all I could upload to Citrix so people can see the update ?? Thanks
-
- 2 replies
- 891 views
-
-
I use Illustrator 10.0.3 and FileMaker 6.0.3 on Mac OS X.2.3. Whenewer I copy an element of any sort in Illustrator it conflicts with FileMaker. Everything in FileMaker is going very slow until I quit Illustrator. WHY - or more important - can I do anything about it? Jesper Videbak
-
- 5 replies
- 706 views
-
-
I would like to make a webpage using Filemaker 4.1 and word 2000. When viewing the page I would like to have a drop-down list of all the products available from one database using a value list that uses a field to assign it values, thereby making the webpage drop down self-updating as it were. After selecting the product from the list it would show the record on the page and the drop down menu would stay above it. I used the cdml instructions to make various searches but I have been unable to combine the features I would like. If anyone could provide any assistance I would be extremely grateful.
-
- 0 replies
- 1.1k views
-
-
FM 5.5 on OSX has been acting weird(er) for me today, and I am thinking about deleteing the prefs file. This got me to thinking, what else besides the basic applicatioin prefs are stored in there? Are windows positions for databases stored in there?
-
- 1 reply
- 667 views
-
-
Should I upgrade to Filemaker Pro 6.0 Yes No (if no please let me know why) Also ... If I upgrade one of my computers to 6.0 and open a database in the 6.0 ... Will I have to upgrade all of my other 5.5 computers to open that file or can I use both 5.5 and 6.0?
-
- 1 reply
- 828 views
-
-
ok, this may be way out of my league as a newbie. but, I will ask how to go about it anyway. I work as a booking agency. so sometimes deals fall through or are finalized. I want to keep ALL records, but records that I am done with I don't want to see them. But if I need to ever go back and look at them I want to access them. Is there a way to have active records and non-active records? in other words, when I click find all I want it to only find active records, not finished or rejected one. thanks.
-
- 3 replies
- 619 views
-
-
This has probably been discussed many times before, but I searched and couldn't find any information. What are the pros/cons of using FMP over FMP-unlimited and vise versa. We'd save quite a bit of money using unlimited because there would be no per-seat cost involved. What I'm not sure of is if we can use all the nice features of FMP through a browser-front end. I wasn't sure how portals would work through a web-browser, etc. Is there anything I'm going to have difficulty implementing if I were to use Unlimited instead of FMP? I will have probably anywhere from 20-100 concurrent users at a time in a Windows 2000(Server) enviornment. It would seem to me…
-
- 3 replies
- 517 views
-
-
When trying to open or establish relationships with certain files an error message pops up saying that the file is a single-user file or may already be in use. Why is this happening? Thanks, Ryan
-
- 1 reply
- 626 views
-
-
What is the best possible way for me to: 1. Have a shortcut on each users desktop so they can open that, which opens FM Pro and automatically gives them a "main menu" type layout which would allow them to go to the different sections of databases that they may use. Would I have a local database on each harddrive that I can create a shortcut for which then will give buttons to press to access the different hosted files? I also want to include a login which will be activated when the user tries to go to a certain section off the main menu. Please help, I'm a noob!
-
- 5 replies
- 803 views
-
-
I am brand new to FileMaker. I have a project in which I want to drag and drop selected records (including related records) from one database to another. Ideally a button that opens up to a browse allowing the user to select the record to drag and drop it in another container. Is this possible?
-
- 1 reply
- 630 views
-
-
I hope this is the right area to post this problem I am having. I want to know if there are any known compatability problems with Windows and Mac versions of Filemaker 5.5. I am not finding it on their sight and I have not seen anyone talking about this directly. My mac keeps crashing when two people, (Mac and Win users) are logged into the same file. I am wondering if I will need to do a 2nd full OS re-install on the Mac to fix the problem. I tried this once and it did not seem to solve the issue. But I thought I would post something to see if anyone has come accross the same problem. Thanks, Paul
-
- 1 reply
- 588 views
-
-
The local school only offers training for 5.5, but we bought 6. If I take the training for 5.5 will I be ok with using 6? Thanks.
-
- 4 replies
- 585 views
-
-
Hi....I am using FM 4.0 and had a database showing all the sales for the past year (2002) and I thought I was making a duplicate of 2002 for 2003 and believe I had the copy up and wanted to erase the information and give it 2003 name and whatever happened I lost all my sales information for 2002. I tried finding it with Norton Unerase but nothing just found the 2003 file which was blank as I had not entered any info into it at that time. Is it gone forever or is there still a chance with a program for recovery. Any help will be greatly appreciated. Yes I had backed up but not the whole year I was about two months behind when this happened. [email protected]
-
- 1 reply
- 790 views
-
-
Hi all, thanks in advance for any help. Using FMP 5 on a Mac (OS 9), I am working on a system to track a company's business data, everything from time and cost entry for their employees to billing to their sales and client data. The latest stumbling block for me is the sales and client data. The company I am working for would like to have the following process through their sales channel: Salespeople enter new prospect companies & enter all activity with those prospects as line items in a portal (activity data is a separate file called Activity Line Items). Their current system has separate files for client data(Client DB) and prospect data (Sales DB). C…
-
- 6 replies
- 1.2k views
-
-
Dose anybody know however Filemaker are going to launch FMP 7 soon? It feels like they need to get a new version out to compete with other DB programs. I really miss the function like auto enter that is available in MS access and how about tool tips this is something Microsoft has had for years why is this not in FMP or other simple thing that we today need to buy plug-ins for, for example trigger a script from a field a simple thing that we need plug-ins for. Don
-
- 0 replies
- 807 views
-
-
Hi, We are a small IT company and we develop product like router and electronic devices and would like to have a simple database built in FMP that allows to keep track of project and product development. Is there an FMP solutions that already addresses this type of thing? Or two separate solutions ? Using FMP 6.0 on a Mac and Windows Thanks in advance for any referrrals or introductions. Marc-Olivier
-
- 1 reply
- 540 views
-
-
I am soooo frustrated! I finally got the lines appearing correctly in all parts of my report with much manipulation. Now, every time I change layouts and go back to the report with the lines there is a new gap in them. IT DOESN'T MAKE SENSE!! Does anyone know what I am talking about and/or have any ideas?? Thanks in advance.
-
- 2 replies
- 621 views
-
-
I know this sounds ridiculous, but I am trying to simulate an invoice form from a Word document in FM. I did a report layout. I need a border that will start in the header and extend through the body and footer, about 1" on all sides of the final 8-1/2 x 11 printed document. The only way I could figure this out was to manually draw lines through the parts and around the text, but no matter how far I extend the line it simply will not show up in the footer section. The border stops where the "body" stops. What am I missing? Thanks for any insight!
-
- 3 replies
- 735 views
-
-
Does anyone know of any schools that offer Filemaker 6 training in the Bay Area? I can go as far south as San Jose and as far north as Sacramento, but would like to stay near SF or in the east bay. Thanks. -Mikhail
-
- 1 reply
- 538 views
-
-
Hi, I have developed (with the wonderful help help of some in this forum I must say) a FileMaker system which needs to be accessed by about 10 people over a LAN and about 10 people via the web. I have read other posts about FM Unlimited and FM Server, but am not entirely clear on when is appropriate. I understand Unlimited allows an infinite amount IP addresses for web access and FM Server is for LAN serving, but I'm not entirely clear on when each is useful. Do I need both or just one of them? thanks! Nate
-
- 6 replies
- 911 views
-
-
I am considering developing a web service based on FMU, which would be server colocated. Can I log in as a regular FM6 client to FMU to work with the database like I normally can with the basic FM6? Is there a limit to the number of FM cients to FMU? Also, are there any general rules to determine how powerful a machine (Mac) you need to handle a given amount of traffic?
-
- 2 replies
- 896 views
-
-
Does anyone know of any classes available online for File Make Pro 5.5 or that are available in the area of Riverside, California. I appreciate your help
-
- 4 replies
- 747 views
-
-
I went thru the report gen wizard to create a report layout. I am sorting by a field containing a value list. The field I am trying to sort has repititions of four. The report will only sort and select the first choice in the field leaving the others out of my report. Am i going to have to make a field for each choice instead of a field w/many repititions? Have I passed on enough information to be understood? Thanx
-
- 3 replies
- 641 views
-
-
Yes... a giant leap backward. A new client has been very satisfied with FM2 and would like to hold on to it so she can work on an old powerbook without much RAM. But she would like to be able to send mail. Is there a send mail script step in FM2? If so, does it drop messages into Eudora? Any issues I should watch out for? Thanks.
-
- 1 reply
- 847 views
-
-
I'm not exactly sure which form to post this one under? Can you program your Function keys (windows) to be used in Filemaker? ie.. F2 = New Record If so can you point me in the right direction so I can read up on this. Thanx
-
- 4 replies
- 1.1k views
-
-
good morning everyone and happy new year. this is my first post (WOOT!) and probably not the last. lol lets say i have 12 forms and one is a weekly progress report. how would i make a new one for the same person but not having to make a totally new record. i guess what i am trying to say is i don't want 5 records with the first one having all 12 forms filled out and the other four with only the weekly progress form filled out and the rest blank. thanks in advance guys
-
Hi ! I have to write a script which does the following. Transfer all the records who enrolled in 2001 from Main.fp5 to Completed.fp5 I have a field called enrollment date I have to check the year and transfer all the records from the main file to completed file. Does anyone have a clue on how to transfer all records from one database to another ? Thanks Sara
-
- 2 replies
- 969 views
-
-
Please help, I am trying to create a web-based database for my company and have hit a wall. We have two systems (FM Pro 6 Unlimited and FM Server 5.5) and I am trying to get them to work togther. There is a dedicated Mac OS X machine running FM Pro 6 in the "DMZ" and there is a dedicated Mac OS Xserver running FM Server 5.5 (to host the files). The Server is running inside my companies intranet and the FM Pro 6 machine is serving web pages to the internet. The problem is that I am trying to get the FM Pro 6 machine to "see" the hosted files from the Server machine inside our intranet (of course it can't) so that they can be posted to the web. How can this be done, …
-
- 6 replies
- 1.1k views
-
-
Hi, this is my first post, been using FMP for a couple of days, so bear with me. IS there a way to create a button to insert a date where my cursor is? for example I have created a database with my clients in it. I need to insert the date a lot and get tired of typing it over and over. I was hoping I could add a button and whatever field my cursor was in the date would pop in right there. Thanks in advance for any help.
-
- 3 replies
- 1k views
-
-
I am planning to enter a couple of years of horseracing results into a database, information such as the horses that ran, weight, jockey, odds, time etc. I eventually want to be able to search for a specific entry in a selected field. Now I am just requiring any tips before I start. How shoudl I enter the information? Should i put the thousands of horses into one database, or should I keep it in a few smaller databases? I could have a different database for every track? But my intention will be to search through every entry for specific information in a selected field. Any help or tips greatly appreciated. Thanks. p.s. I am a newbie to Filemaker. You pro…
-
Hello! I'm a FileMaker beginner and have started to play around with FileMaker. Can anyone guide me in how to create data entrance forms? Basically, I want my users to add data in a simple form and then press a button which verifies their data before it's recalculated and inserted into the database as one or more posts. Is there a standard method to do this or do I have to use temporary forms and/or scripts? I use FileMaker Pro 5.5.
-
- 4 replies
- 1.3k views
-
-
Greetings to all from a group newbie Really stumped. I have been running FM pro5 on an XPpro laptop for about month with no problems until now. Created a related file to an existing (and working well) database and all seemed fine until I tried to open the same file set while not connected to my home network. At time of creation "relative path" was set and I did have TCP plug in and protocol selected. Relationship was mistakenly made to a copy of the same file on another drive on the network (whoops). After seeing my mistake as viewed in Window (another instance of that file checked) I remedied it by reestablishing relationship to the proper file. If you don't have a h…
-
- 3 replies
- 1.6k views
-
-
I have a relational database set up as Sales (details of all Sales transactions), Contacts (for all non-sales contacts), and Customer Master, with all remaining data on a customer, and portals to the previous two. My Master has about 4500 records, my sales has about 1700, Contacts about 1600 or so. Well, I haven't made any modifications to my DB in a while---I'm too busy making sales! But, in any case, about 3 weeks, ago, everything just started moving more slowly. Not just lookups and sorts and stuff, but also just plain window views. I've found that even an extra second or two added to each maneuver ends up interrupting my workflow. I'm just wondering if this is c…
-
- 6 replies
- 951 views
-
-
Hi All, After upgrading from FMP to FMU and now using the WSC, I have found one minor problem I don't quite understand. My web site consists of a few pages in the root level folder, and there is also a folder inside that which contains images for use as buttons. My pages use relative linking to call the objects inside these foldes. eg. <IMG SRC="images/clearspacer.gif"> All worked (and still works) perfectly while I was using NAT to access the databases, but if I use the WSC, none of the images load. Can anyone help me fix this? I realise I could move all the images or stop use relative links, but I don't think either of those is the best answer.…
-
- 5 replies
- 921 views
-
-
As usual, I'm hoping this vast knowledge base can help me out. Here's my deal: We have reports cards in FM. Many teachers type their comments at home and then cut/paste into the FM report card. Trouble is, it retains the formatting (font, size, etc) of the word processor they created it in. We need the report card to be in a specific size and font, though. I've tried locking the field, merging the field into a text box formatted with our text formatting, but I can' seem to strip away the old text styles. Is the only option to go in and manaully select all, then change the text style? Please say it ain't so....
-
- 5 replies
- 1.1k views
-
-
Hi ! I am having problem using the If function of filemaker pro. I have defined a text field called Fin.Aid Student which has value pop list YES, NO. I have defined another field called FinaidSecond which is a calculation field. The formula used is If( Fin.Aid Student = "YES", "No Second Extension Allowed", " ") I have made the calculation result option box as text. This does not work when i test it. Whether the Fin.Aid Student field selected is YES or NO it always displayes No Second Extension Allowed in the FinaidSecond field. What could be the problem with this ?
-
- 10 replies
- 1.4k views
-
-
[color:"red"] HELP... I have a filemaker file that is about 1.36mb and is "corrupt". After running the recover function on the file it ends up being about 1.18mb. (losing about 12-15 hours of work... ) WHAT CAN I DO! PLEASE HELP ME! IM DYING HERE!!! [color:"blue"] I HAVE THE FILE READY TO EMAIL TO YOU IF YOU THINK YOU CAN HELP ME .... I WILL BE WATCHING FOR RESPONSES...
-
- 5 replies
- 785 views
-
-
Hi ! I am a beginner in FileMaker Pro and my boss wants me to write this complicated script using FileMaker Pro. Please could anyone help me go about writing this script. The things I need to check in the script are 1. Are you a student? field (values as drop down box) says "YES" 2. Transferred field is not filled AND Withdrew field is not filled and Completed field is not filled 3. A date is entered in TO. INSTR field 4. The First Extension Expires field does not have a date in the field AND the Second Extension Expires field does not have a date in the field AND the Expiration Date field is between 2 dates (to be entered by the person carrying out search) …
-
- 1 reply
- 715 views
-
-
Hi ! I have 2 fields State and Zip Code. When a user enters State information for a new record I want the corresponding Zip Code to be automatically displayed in the ZipCode field. I have a drop down box for the user to choose the State. Once the user chooses the State I have to automatically put the value of that State's Zipcode in the ZipCode field. Please tell me how to go about this.
-
- 6 replies
- 803 views
-
-
Please help me accomplish the following requirement in FileMaker Pro. I have 5 fields each with values YES & NO 1. UM Fee Waiver 2. FS Scholarship 3. Fin Aid Student 4. DANTES 5. VA I have another field called Enrollment Date which is a date field. I have to define a new field called FA Semester. The value of the FA Semester field is based on the following conditions. If (UM Fee Waiver = "YES" or FS Scholarship = "YES" or FinAidStudent = "YES" or DANTES = "YES" or VA = "YES" ) { if (Enrollment Date is between Sept 21 through Feb 20) FA Semester = SPRING else if (Enrollment Date is between Feb 21 through May 10) FA Semester = SUMMER els…
-
- 1 reply
- 633 views
-
-
I'm developing a custom FM inventory system for a friend. After reading around about different ways to do it I'm left with a few questions, and have an idea about a slightly different way to do it that I'd like to get feed back on. An inventory system that just keeps a table of items and their count is frowned upon, and for good reason, it's hard to tell if the data got corrupted. So just about everyone will tell you to do a transactional system. The inventory is really a line-item database of credits and debits, if you will, from the inventory. Calculating the current stock is a simple Sum(). I see my line items going into different DBs. OrdersInLineItems and O…
-
- 13 replies
- 1.6k views
-
-
i am trying to open a pdf in a container field but if the file is embbeded it just gives me a memory error, it works fine if i just make a link to the object, heeeelllp i am using 5.5 on a pc with W98 64 megs of ram and 500 proc please help
-
- 3 replies
- 935 views
-
-
Hi ! I was wondering how to generate fields dynamically in FileMaker Pro. Based on the value of one field called no. of lessons I want to generate that many more new fields giving descriptions. For eg if the no. of lessons is 7 then there should be 7 more fields created each giving dates & details of the lessons. If the no. of lessons field value is 10 for another record then i should generate 10 more fields giving details of the 10 lessons. Could anyone help me on how to go about this requirement.
-
- 2 replies
- 573 views
-
-
What do the experts say regarding Status Bar / No Status Bar? You see many different solutions today. Some show the standard FMP status bar on the left and some hide it. Other than aesthetics and allowing additional space on the window. What rational would one use to determine the way to go with a custom solution? It may seem trivial at first blush, but it's really something that needs to decided right up front. Or at least before you write your first script. Thanks for your help. hj
-
- 64 replies
- 5.5k views
-
-
We have a school student/address database setup with about 500 students. Previously this was used by one or two secretaries, but now that we have FileMaker Server we would like teachers to be able to look up student addresses if needed. The catch is that we only want teachers to be able to see addresses for students in their own classes. FileMaker Server seems to have nothing built into it for permissions, and the permissions built into FileMaker don't seem appropriate for this either. It was suggested that we may need to make a form for each and every teacher and write FileMaker scripting that limits teachers to seeing their own form. Is this correct? This seems like a…
-
- 4 replies
- 760 views
-
-
-
Not sure if anyone has posted this in another forum, but here it goes... http://www.filemaker.com/downloads/index.html New in FileMaker Pro 6.0v4 General fixes [*]Import/Export XML operations involving remote XML/XSL data sources or files generated multiple HTTP requests. These tasks are now completed with a single HTTP request. [*]HTTP requests sent during an XML import can include passwords or other sensitive data. To prevent the potential exposure of this data, the progress dialog displayed during time-consuming XML import operations no longer displays the HTTP request URL. For information on the secure use of this feature, visit our suppor…
-
- 0 replies
- 1.5k views
-
-
we are looking for a single seat 5.5->6.0 upgrade, with pricing for higher education. I found the retail upgrade for $150, know where I can find an upgrade with the ed. discount?
-
- 3 replies
- 832 views
-
-
Greetings, I've got a couple of questions for all of the FMP experts because my problem has this casual FMP guy baffled. We're running FMP3.0v6 on W2K client workstations and 3.0v4 Server version on a W2K Server. Yes I know I'm working on vintage FMP but my company hasn't wanted to spring for the newer versions because we are and have been in the process of phasing out FileMaker. Anyway, FMP has been running hands-off for years and suddenly last week it started to hiccup. What's happening is the users are not able to connect because after pressing the HOSTS button because the list comes up blank. We have been solving the problem by restarting the FMP ser…
-
- 10 replies
- 1k views
-
-
Ever since I upgraded to version 6.0v3 from 6.0v1, I can't get the "show recently used files" to work. I get the error message "This command cannot be used by this installation of FileMaker". Where did I go wrong? Bob Rann
-
- 0 replies
- 775 views
-
-
Hi, I've been reading on Filemakers site trying to figure out which filemaker we need were I work. I work in this guys home office where he has 4 computers and a laptop networked. If we both want to be able to access the database, from any of the 5 computers, do we need 5 Filemaker pro licenses? I thought that I had read that the regular FileMaker Pro would allow up to 10 before you had to buy Server. Am I totally loony here? Thanks, Joe
-
- 5 replies
- 817 views
-
-
I'm now working on a PC after 13 years on a Mac. It's an adjustment. . . I have a DB in which I keep some text forms. I print them out, then fill them in with pencil. For years I have created the forms in PageMaker, then copy and paste the form into FileMaker without a problem. The forms are nothing more than text with some column lines. FM on the PC is not allowing me to paste the entire form - it won't bring over the lines. Am I missing a step or something? Maxwell Morlay
-
- 1 reply
- 784 views
-
-
I am using Filemaker 5.5 on a server without the aid of Filemaker Server. The files are kept on the server and our 7 users access the server use a tcp/ip connection to access the databases. This enables the databases to be backed up nightly. We have this annoying problem. Occasionally when we open the Databases they open as read-only. This doesn't happen all the time, and rebooting the client computer usually fixes it for the moment. Does anyone know how I can stop this from happening all together...my boss is getting rather annoyed. thanks! KNH
-
- 1 reply
- 516 views
-
-
I run a small cleaning firm and run FM 5.5 on a mac. I'm new to FM and was wondering what is the best plug-ins to get for FM for a service company, or do I really need any. I'm mainly using it for my customer base, but would like it to alert me when it's been pasted 6 months since a customer had there last cleaning, it that possible? thanks
-
- 1 reply
- 700 views
-
-
Dear All, I am going to convince my client using Filemaker . But I don't know the advantage and disadavantage of Filemaker versus Ms-Access and Oracle. Someone could give me the important key? . Is there a case that you program intelligently different with th books told you? I am really appreciated. Thanks
-
- 18 replies
- 8.3k views
-
-
Hi there people, I have been reading the forums for about 2 days now and thought I'd say hi. I have a couple of problems that I was wondering if anyone could help me with, I have done a search for it before I'm asking and couldn't find a good answer to is (as I'm new to FM and didn't understand it) Anyhow, here are the questions: 1. I have a database with names and numbers that I input but also copy paste into, I have set the fields to a certain font and font size, but overtime I paste into a field it doesn't paste it as the format I have set, I know it can be done but I haven't found an 'idiots guide' to it. 2. I need to create a 'find' feature with…
-
- 2 replies
- 751 views
-
-
Hi, I'm running fmp6 and creating a scientific database which holds various information of little relevance here. However, I need to create a field that will contain several references to scientific papers. I'd like each of these to be able to link out to the paper itself in either pdf or word format. Can anyone give a few pointers to an absolute beginner? Much appreciated! Sam
-
- 1 reply
- 536 views
-
-
We have a very complex group of databases that seems to be experiencing some weird problems. We have one calculation field that is the sum of several fields but it doesn't always do the calculation. If we search for records that contain data in one of the other fields there should be a subtotal in the "bad " field. What is strange is that sometimes it does not do the subtotal until you browse another record and then come back. This same subtotal is included on a sales summary and in the summary it does add up our totals right. Basically there are some inconsisitencies in one or two of our calculation fields and we can't figure out why, other than possibly database dam…
-
- 2 replies
- 668 views
-
-
Has anyone written an inventory module for the FileMaker Solution Framework? The framework works exactly right for my project but some stock and inventory control would be most useful. Carl
-
- 0 replies
- 688 views
-
-
I have a file that is an address book and has .fp4 extension. Now we have a system with 15 files that was developed using FileMaker 6. If I install FileMaker Server 5 on the server machine and Filemaker 6 on the client machines will I have any problems with my address book.fp4 ? What will happen ? What should I do ?
-
- 1 reply
- 650 views
-
-
The company I work for is currently using Access for users access a postgres database. The users are mostly OS9 and we use Citrix server for them to use Access (currently Windows only). The system isn't perfect and we need to upgrade to a newer version that should help the problems we're having. The problem is, the newer Citrix will cost a few thousand dollars and will still be a round about system. We need to be able to open it as a database (which will be hosted on FM server 5.5), edit it and have it changed in the porstgres too. I've been tasked with finding out if something like this would be possible in FIleMaker 5.5 (or 6 if needed). I've looked…
-
- 0 replies
- 661 views
-
-
Maybe I am doing something wrong... but, when I try to install FM6 in OS X onto a new computer (G4, 1.25Ghz with 2GB of RAM), the following message appears "The Software to be installed requires 8 MB of total machine memory (RAM), which this computer does not have." What can I do about this? Help
-
- 7 replies
- 983 views
-
-
Hi, is it possible to unable user to create new database with FM. We only use FM as a client to connect FMServer. thanks
-
- 6 replies
- 863 views
-
-
I have been told by a software supplier that a Filemaker session is hogging the (Windows) clipboard thus preventing the software from printing. I'm sorry that I can't be more precise but it is a problem I have inherited. I am also told that a large UK retailer had a similar problem and overcame it. So the software company may be onto something. Does Filemaker 'hog' the clipboard? If so is there any way to stop it?
-
- 4 replies
- 1.5k views
-
-
Hi, Is there a limit to the number of records that can be displayed correctly in Table View? The Table View starts to behave strangely when there are more than 3855 records in the foundset i.e. the information displayed in every subsequent record is incorrect (copied from another record). This behaviour is not specific to one database as I have created a test database with only 1 field and I get exactly the same result. Regards Pat
-
- 2 replies
- 1.1k views
-
-
Need if you have somme new Icon for Filemeker 6 like Print,copy,delete and other if you have. Thanks
-
- 7 replies
- 902 views
-
-
First time poster, so this may be a little basic for some of you. I've got some FileMaker experience doing simple projects at home and at work, but not enough apparently to tackle this situation. I'm trying to build a baseball card collection database so I keep up with all my old cards, prices, etc. Since many of the cards will have the same player names, I'm trying to figure out a way to minimize the data entry. I can make a value list from a database of player names - no problem. But how can I add to that list of players from the master database (where each card has a unique record) without switching to the player database and creating a new record? Can I …
-
- 1 reply
- 672 views
-
-
Dear All, I installed Filemaker software on few machines then I realize that some machines open filemaker very fast and some open very slow . Do you know which important factors that make the speed of loading filemaker slow or fast? It seems to me that I have no clue how to find factors. Thanks
-
- 1 reply
- 720 views
-
-
I am running FM Developer 6.0v3 on Mac OS 10.2.2, and have been having Filemaker unexpectedly quit. This happens fairly often when I mouse-click on a value list -- happens on different lists in different files. I have found the app will quit even when I am editting the list and mouse-click OK or use the enter key. If I select an item in the value list with the arrow keys and use the return key, there is no problem. Anyone have ideas? Thanks! Dan
-
- 1 reply
- 731 views
-
-
hi all, i heard that a solution crashes after 2gb. is this true? peter
-
- 2 replies
- 819 views
-
-
I have a database in 5.5 that is used to enter Purchase Orders. When I created it, I created a Header with vendor and customer info, a Body with repeating fields for Qty, Price, Description, etc, and a Footer with a Total Amount field and a few other things. I set up the repeating fields with a repetition of 14, and everything displays and prints perfect. I need to be able to have at least 75 lines for entering the line item detail info into the Body, but when I set the repeating fields to 75, they extend way beyond the borders of the page. So here's my questions: Is there a way to lock the Body and use vertical scroll bars for entry? I already checked the FM KB,…
-
- 4 replies
- 985 views
-
-
I have been having some issues with clients (FMP 4.0v1) trying to connect to database (hosted by FM Server 3.0v3) and also sometimes trying to print (access violation c0000005, in both cases). After researching both here and on the filemaker site (yup, I've seen article 104759), it seems there are multiple possibilities (i.e. printer drivers - we do have HP Laser Jet 5s). Before I get into changing the drivers and all that, I think it is most important to have the lastest versions of both the client app and server app installed. But our products are so outdated, I cannot seem to find updaters on the filemaker website. Anyone know where I could find them?
-
- 5 replies
- 1.4k views
-
-
I just started learning about FileMaker and the web. Here's an idea I had, wondering if this would work (or work securely). I don't actually need to do this, I'd just like to know how/if it could be done should I decide to do it... Customers could go to our web site to check their account balance. They would enter their client ID and postal code into a search which requires exact match for security. They would then see a list of invoices (showing only invoice number, date, total, paid, and due... no personal information). I'd like to then have a "Fax Back" button next to each invoice which would tell FileMaker to fax the invoice to the number on file. I read in …
-
- 2 replies
- 973 views
-
-
What exactly are the benefits to using two machines to host FileMaker Server and FileMaker Unlimited? Performance-wise, I would like to think a brand new Xserve would be able to handle the two of them(?), but what about security concerns? Can you also clarify my understanding of FileMaker Unlimited? My understanding is that it is basically a more powerful version of the built in Instant/Custom web publishing feature in FileMaker. Is this correct? Thanks!
-
- 2 replies
- 1.4k views
-
-
I was working on this database I designed and then I did a stupid thing. I was working with part setup and made a new header. I didn't like the header so I went to delete but hit the body part instead. I didn't make a backup of the database either (i know, I know, shoot me now) anyway I lost 10 hours of work in this database that was almost done. My question can I get the body part back with all the fields I had and the layout I had or am I screwed and have to start over?
-
- 1 reply
- 647 views
-
-
I've been using FileMaker Pro 6 on osx 10.1.5 for a few months but recently its been having problems loading up. On opening the app, it loads up and displays the load dialog but after a few seconds just quits with no error messages. The classic version is working fine (although under classic in osx its very very slow). I've tried reinstalling FileMaker but it didn't help. I haven't come across this before in previous versions of FileMaker or in any other osx applications. Has anyone got any ideas? Its annoying as there are no apparent errors to go on. Thanks in advance for any help. Cheers, Craig
-
- 0 replies
- 582 views
-
-
Does anyone know how much memory I should allocate and what the cache size should be when using FMPro Unlimited 6.0 and/or FMPro Unlimited 5.5?
-
- 1 reply
- 1.1k views
-
-
Dear All, We have been installing FileMaker 5.5 on some new PCs (running Windows 98 SE) and have encountered the following error on one single PC when trying to install Error 1723. There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor. We have setup each PC identically and this PC is the only one affected. We have contacted FileMaker Technical Support in the UK and they didn't have any idea why this would happen and could only suggest reinstalling Windows. Does anyone have any idea why we are getting this error or does anyone know where we …
-
- 1 reply
- 1.3k views
-
-
I posted this under FileMaker Server, but haven't gotten any responses. I thought I would try it here. Any help would be greatly appreciated, as this problem is making FileMaker virtually unusable for our company. I have searched online Help, the FileMaker web site, etc and can find nothing on this issue: I am hosting several multi-users files on a G4 Mac with Filemaker Server 5.5. Two clients running Mac OSX 10.2 are occasionally unable to open any of these files because of "An error of type 6". This happens with both the "Launch.fp5" I wrote and if I go to Open Remote, thru the hosts menu. Can anyone tell me what this means? It only happens ever…
-
- 7 replies
- 1.3k views
-
-
We have a database with a Container field in which we would like to hold Word documents. The system specifications are: Window XP Pro FM 5.0 Office 2000 The problem is that when the Container field is double-clicked, while containing a Word document, an error is returned: "Filemaker Pro cannot complete the operation because of an OLE (0x80004002) error" After clicking on the OK button the message "Sorry there is not enough memory to complete this operation." Other documents, such as pdfs, work fine. Any help appreciated. Thank you. Garry
-
- 2 replies
- 973 views
-
-
I have a "Phone" field in the format (xxx) xxx-xxxx. I need to convert this to the format xxx-xxx-xxxx. What calculation will net me this result? [color:"blue"]
-
- 3 replies
- 1.5k views
-
-
I am trying to install v5.0 on XP but it keeps telling me that I can't install it on this version of windows, yet on another location with XP I can install it. Do I have to install it as an administrator
-
- 1 reply
- 555 views
-
-
Since nobody seems to be using FMS with OS X 10.2, I thought I'd ask if here: Is anybody using FMP or FMD with OS X 10.2? Any problems? issues? I want to upgrade to 10.2 really bad... but I can't move if it will break FMP/FMS. I've heard vague references to issues with 10.2 in other threads, but nothing explicit. I'd love to hear from a dozen or so people, "I am using it with 10.2, and its working fine." Anyone?
-
- 2 replies
- 751 views
-
-
FMP 6 running under Mac OS X 10.2 wants too much attention. If a script is running and it is printing and the print command is set to bypass the print dialog, FMP insists that it be the foremost application and will stop all activity until it is! This is a problem if you are looping through 400 records and each needs to be printed separately. This basically locks out the user from using her computer until this script has been completely processed. As far as I can tell, FMP pretty much ignores its environment and wants to act like it is the only application running at some times. Is there some way to get FMP to continue printing without having to be the frontmost appl…
-
- 0 replies
- 635 views
-
-
I am trying to make use of the phone dialer function in fm pro 4, and although in the sample databases it works i cannot seem to do it myself??? The first problem is that i cannot get a graphic of a telephone that will run the script when clicked on. I currently have a modem to connect through but i would like to free up my slot so id there any way to utilise my network connect to my server??? Also if i want to have both my phone lines available to be used how would i got about this?:? Much appreciated if anyone can help. this is the first time i have tried to do much with filemaker 0 i have been using access upto now. Thanks.
-
- 0 replies
- 796 views
-
-
Dear All, After I install FM 6 locally, then I load the file , there is an error message " The file WS2_32.dll is not found " . How can I solve this problem . I did tried to file the file above but it is not found. I have this problems on few machines only. And also , I really don't know why I just install FM 6 locally, but some machines load FM very fast ...some load very slow? ...Do you know why? ...where to check the sources? Thanks
-
- 0 replies
- 627 views
-
-
when i run the updater i get this message: "The default location for this install could not be found." i like to change folder and file name and did that with the filemaker folder and application. is that the problem? if so, can you give me the original names so i can change mine back. thanks, will
-
- 2 replies
- 762 views
-
-
Hello all, I have FMPro 5.5, and I want to make some of my files available to two friends. I want to buy older versions of FMPro for them (less expensive) so that they can use my files. Question is, are my 5.5 files compatible with version 3 and 4? I can buy the older versions (especially 3) cheaply on Ebay. My friends don't need to change anything, or develop anything, but just be able to run my files. Any suggestions? Thanks, Lynn PS: If it helps to know this, one file will be a contact management system running on several dbs. The other is a photographic slide cataloging program, including lo-res images, descriptions etc.
-
- 2 replies
- 772 views
-
-
I've heard that FMP has a 2 GB size limit but what does the size limit refer to? Is it the maxmum size of one file or the maximum aggregate size of all related files opened at one time or what? Thanks The Mad Jammer And then...there was nothing
-
- 6 replies
- 767 views
-
Recently Browsing 0
- No registered users viewing this page.
Who's Online (See full list)
- There are no registered users currently online