360Works Email Plugin

Hello - I wanted to use this plugin for archiving mail and wanted to just import a .olm or MBOX file - can I do that? Or is there another 360Works tool for this?

I am working with 360Works Email plugin, 5.05 Enterprise version and FileMaker 20 - or, at least, trying to. 😉 I have seen some samples with the approach: set variable [ $result = EmailRegister (bunch of stuff) and ... and ... and Email Disconnect ] Examples: http://docs.360works.com/index.php/360Works_Email/Documentation#Function_Detail I have also seen that many of the email functions are listed as script steps. I'm comfortable with functions and script steps, but am wondering: why we have both, if there are differences in their usage, if there are best practices to use one over the other, etc. Instead of using a complicated multi-…

Dear members, I began employing the 360 Works plug-in to streamline the transfer of email inquiries, converting them into text and funneling them straight into our primary FileMaker database. It's been a smooth operation so far. However, the persistent issue I'm facing involves the relentless influx of duplicate emails. Despite consulting the documentation and applying various filters, I haven't managed to halt this redundancy. My setup operates via WebDirect, which adds an extra layer of complexity to the automation process. My script is attached. Your help is much appreciated.

Dear members, I began employing the 360 Works plug-in to streamline the transfer of email inquiries, converting them into text and funneling them straight into our primary FileMaker database. It's been a smooth operation so far. However, the persistent issue I'm facing involves the relentless influx of duplicate emails. Despite consulting the documentation and applying various filters, I haven't managed to halt this redundancy. My setup operates via WebDirect, which adds an extra layer of complexity to the automation process. My script is attached. Your help is much appreciated.

One of my users has frequent crashes while attempting to send emails. What's the best way to narrow down the issue a bit? The only common thread at this point is sending emails. Windows 10 Filemaker Pro 19.2.1.14 Email Plugin: 4.024506 (I believe) I tried updating to 5.01 but it did not work. I believe it was 100% crash rate, but it was a while back, so I do not remember at this time. Where should I go from here? Thanks,

I have some plugins installed in my solution, after a while the license of one plugin expired and <Function Missing> immediately appeared in every script that used the plugin, when I realized the problem I renewed the plugin license, but the problem remained , the functions were not restored, it seems that filemaker eliminates all types of relationship with the expired plugin, in my case I have around 90 <Function Missing> and I have to redo my code again, that is a lot of work and a big filemaker vulnerability , the correct thing would be for the <Function Missing> to be restored automatically after renewing the plugin license, but it has not worked tha…

I'm starting to notice a few emails are missing in FileMaker after reading them from the email server. I'm assuming they are not getting picked up from the email server. So far, this appears to just be in one email account. What might cause this, how to fix it, AND is there a method for searching for those missed emails. What I mean by "missing" : I can see the emails via the web portal to the email, but not in Filemaker. The script is running a scheduled servier side script. This is what I'm using:

OK, I've got a rather nice FileMaker email solution for a client, and the number of emails that need to be deleted is quite large. I think the only way to delete these from the email server, before deleting them in FileMaker, is setting the "deleted" flag, on a one-by-one basis. Is there a way to do this in a batch without looping through the deletes. Looping through is very slow, possibly 15 seconds per email/record. If I've got thousands to delete, I'd like to be able to do this in bulk. TIA!

Evaluating the email plugin for purchase, but can't get it to return the token. Have created proper Azure AD App with ClientID and Secret. Using the Demo file, I've entered required information and consistently get "Authentication failed, please check authentication info." (despite authenticating successfully into my account) Are there specific App permissions in the Graph API that need to be set that the Plugin documentation doesn't mention? Thanks!

Hi there, I have just downloaded and installed the email pluggin for filemaker 19. I see there are numerous demo files but do you have a run through for integrating Microsoft360 mail? I have never used plugins before but will need to streamline my emails and will require something other than what is supplied with filemaker. Also need to discuss what would be the right licence for me. Can you please let me know who would be the best contact for purchases, thanks

Hello, I just upgraded to MacOS Monterey, and downloaded a fresh FM Pro 19.5.3. Then I downloaded and installed Email plugin 4.024506. Every time I start FM Pro I now get the following error: Plug-in initialization error Unable to initialize plug-in child process MacOS Monterey Email-plugin 4.024506 Claris Pro 19.5.3 (Not tested other 360Works plug-ins yet.) Looking forward to hearing from you. I keep upgrades at client sites on hold until the culprit has been found. Best regards Tommy A.

I have performed a couple of upgrades from v3 to v4 of the Email plug-in, but for my most recent one I am getting an error on reading emails via IMAP. The connect step runs without error, but when reading emails it tells me IMAP is authenticated but not connected. I have checked the Office365 settings and all looks to be set up OK for auth and IMAP Would anyone have an idea why this would occur?

Is there any definition for the token store, if we can already get back a token and refresh token and want to use that, can we write to it? Is there any way to use our own redirect URL? Is there a way to use our own tenantID?? thanks John

Why would sending emails from my own machine be slower than others in the office? It's certainly not CPU/RAM related as my machine outpaces their machines by a fair margin. What is the best path for tracing this issue to find the source? For reference, I sent the same email (via script) from four different machines. Three of them took ~3 seconds, mine took >10 seconds. That is pretty typical and it's been like this for months. I just assumed everyone had slowed down until using one of their machines last week for something. Thanks.

Hello, I am running FM pro 19 on windows 10. I am using 360Works email plug in I am wondering if it is possible to delete emails after "downloading" them. I receive RFQ (request for quote) emails from a single sender for a government contract we have. My script reads all the emails and creates a record for each one, parsing out the details of the body of the email into various fields. I then run a script that searches through all those records and looks for keywords so I can determine what RFQ's I can bid on. I then go through those selected emails one by one to make a final decision. I mark each one as a no quote or a quote then proceed from there. B…

hello Friend, here i am using the 360 works Email plugin for sending image file of company signature with EmailAttachFileInline scriptcode provided by you. Working well. No problem. Now i have develope the Clickable URL signature File in so that can be go to direct there on clicking our website or email link . But when i insert it and send mail on receiver side the signature file received but the links are not in clickable way. Sig_File.pdf

Hi, I got this error while reading emails from a POP gmail account. Solved it by importing the emails using a different plugin. Worked for 1 day and then the error retuned. Is there a remedy to fix this permanently ? Best, Ruben

I have the 360email plugin installed on our Server (FMS19.3.2) and it has been working fine for months. (Previous versions working for years!) Starting Saturday just before 1AM the plugin Failed to load on the server. AFAIK we are up to date with licensing and nothing has changed on the server (OS updates FMS Updates) this week. Here is part of the log file. Any ideas? TIA Jerry Nov 06, 2021 12:18:48 AM C++ <Native> INFO: [C++] Unregistering plug-in script step EmailReadMessages Nov 06, 2021 12:18:48 AM C++ <Native> INFO: [C++] Unregistering plug-in script step EmailAttachFile Nov 06, 2021 12:18:48 AM C++ <Native> …

I've been using the Email plugin for about a decade, BUT this is the first time I've needed to pull >100k old emails down from the email server to Filemaker. I'm finding that anything over 2k emails being retrieved seems to choke FileMaker, and retrieving 2k at a time is going to take a loooong time for two email accounts. What have you folks come up with for bringing decades worth of email into FileMaker?

The UID as recorded in outlook comes as a hex value. but when grabbing UID using ReadMessages it comes as a base 10. is there anyway to retrieve it as the same hex value recorded by the mail servers? thx!

Is there any way to get the actual SMTP error number? The result of EmailSend is either 1 or ERROR EmailLast Error gives a text description. I'd really like the number when I'm trying to debug from the email server logs.

Hi: My environment: Claris FM19 Pro Mac - OS BigSur v11.2 + Safari v14.0.3 FM Cloud for AWS 360Works Email Plugin Enterprise license v3.3 What I have done: In FM Cloud Admin Console In Connectors/Plug-ins: I've enabled: FileMaker Script Engine Plug-ins Install Plug-in File Script Step Web Publishing Plug-ins Install Plug-in File Script Step FM Cloud Admin Console print screen In FM19 Pro: Run EmailClient.fmp12 Install license data (license Key + register to:) I've upload it to FM Cloud. I've checked boxes to allow Server Sharing and WebDirect to everyone in the hosted fil…

Hello, I moved my FMS18 to a new server machine last night and I am now running FMS19. I copied all 360works scripts over from the /Database Server/Extensions folder from the old server - only to find the email plugin would yield FileMakerServer Error 4: Command unknown when called from a server side script. In short, we can't call any email plugin command from a server side script. I download the latest version of 360works email this morning, and should be running 3.34016. I issued the restart fsme -y and the server admin seems to show the email plugin as active. The 360Works Email logs show: INFO: No plugin i…

Hi Recently transferred from Exchange server in house to Office365 and all the login processes are now working, but when fetching unread emails from an account I get the below error. Would anyone have any more info with regard to how to allow it to create this folder, please?

I up dated a server on Monday to FMS19.1 After that WebDirect stopped responding every 2-3 hours while people were using it. This solution only sends 1 type of email using WebD. I downgraded that email from 360email to simple FIleMaker Native email. Since then I only had one issue, there might be other places WebD people are calling 360email. Anyone else having problems with 360Works and WebD? Jerry

Starting june 15th, new gsuite accounts will no longer be allowed to access "less secure" apps that don't use OAuth authentication. In february 2021, all existing account will lose access too. Are there plans for the 360works email plugin to support OAuth in the coming months? https://gsuiteupdates.googleblog.com/2019/12/less-secure-apps-oauth-google-username-password-incorrect.html

Has anyone tried using the plugin to send email from the new rich text editor add-on in 19.1?

Coming up empty as to how to install the email plugin for server side scripts on FMS 19 / Linux?

I've just set up Email to pull down 20 new emails at a time, and it's taking ~45 seconds. (2012 MBP, FM 19, OS 10.14.6) This is an IMAP Gmail account for testing. It seems really slow to me, what say the group?

Hi, we're sending SMTP emails through Mailgun to communicate with our event attendees. In order to group the emails appropriately, it looks like I have to tag them by attaching custom variables in the header. EmailSetHeader is straightforward enough, but is it possible to use it to attach, for example, X-Mailgun-Variables: {"my_message_id": 123}? I've linked the documentation I've found below but am still unclear on the right syntax. Would appreciate any direction. https://documentation.mailgun.com/en/latest/user_manual.html#attaching-data-to-messages X-Mailgun-Variables: {"first_name": "John", "last_name": "Smith"} X-Mailgun-Variables: {"my_message_id"…

Can seem to get the Mail plugin to respond on FileMaker Server. At first it wasn't initializing, which we fixed. Now, it simply doesn't respond. We have a script which works fine from the client side, but when run on the server via PSoS, when it gets to the RegisterEmail step, it simply stops. No errors, no logging from either the event.log nor the 360 logs. For now, we're using PSoS, but the intent is to get a timer schedule to run it. The setup: macOS 10.13.6 High Sierra Mac Mini i5 2.6Ghz, 8GB RAM FM Server 18.0.3.319 360Works Email 3.34016 At first we couldn't get the plugin to initialize, this was resolved with the Common Issues post, and by fixing …

In the past I've deployed the Email plugin to receive email for a single email address. Now, I am asked to build a basic email client app in FileMaker. What I want to do is set up a way to allow each user to only pull/receive mail from their unique email account across a single domain name, and possibly sending from their own account. I'm thinking the best way to store each account's specific email address is to create a users table. Then on login, then on the receive or connect functions/script step, pull the user's email address from the users table. Would this be the best way to do this? Another method would be to just pull/recieve all email for that domain…

Hi everyone! We have been working with a system since the beginning of the year and we implemented a 360Works Email Plugin in order to send emails with PDFs attached (sometimes 6 PDFs). It works fine, actually, we have been working with this plugin for years and everything has been fine until now. One of our customers is contacting us and reporting this error constantly, it says "You must call EmailConnectSMTP before using this function". The thing is that it has been very difficult for me to solve this problem and I don't know what to do anymore. It's supposed that I call that function all the time before starting a new email. Also, I can't catch the e…

I created a scratch file to test the functionality and the details given me by the client... The uid returned from the EmailReadMessageValue (uid) was numeric in the range 998-1006 I copied the scripts into a test real file and the same scripts are bringing me back a value like UID1006-1601907140 I re-ran the script in the scratch file under debugger and set results, numeric upwards from 1006 Can you explain the difference between the results, which one I should trust and how do I feed the uid=$value in the EmailReadMessages???

Hi I recently upgraded from Filemaker 15 to filemaker 19. I am trying to use the 360email plugin which has worked great in the past however it now gives me error messages when trying to send out an email with it . the error message I receive is java.lang.NullPointerException. I would appreciate if you could help me out with this .

I am a "more than novice, but less than intermediary" Filemaker user. I'm using FMPro v 16.0.6.600 with the 360Works eMail Plug-in v 3.3 on an older iMac (2009 24" Mac OSX 10.14.6) w 8G of RAM. Several months ago, I wrote a script to send Purchase Orders to my various Suppliers via email, which included 2 PDF attachments (a Purchase Order detailing product costs and a Packing Slip to enclose with the shipped product for my Customers). After a brief period of testing, I determined that it worked as expected - in fact MUCH better than I had hoped for! As part of the email transmission, I automatically send a "blind CC" to my Customer Service address, so I can have a co…

Hi I am using this plugin 360email Works and for some reason ever so often(actually on a daily basis) emails are being missed. I would appreciate if someone could help me with this issue.

Just started to work with a new client, they are running the latest v of plugin on Server 18, and every now and then it turns itself off. Is there any known cases under which this might be the case?? John r

Can you save header information from the EmailSend function call?

Hello, I'm using FileMaker Pro Server 18 and Email plugin 3.3. When sending multi-part e-mails, the same text in the body is displayed twice. After checking the e-mail source, I wonder if there could be an issue with multipart e-mails, as the email quite normally contains the several parts : one is "Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable" and the second one is "Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: 7bit". The parts are introduced by the tag "------=_Part_[some random number]". But depending on the e-mail program I use, the body is displayed twice : - Apple Mail 13.4 - Webmail from…

After moving the .fmx64 plugin file to the Extensions folder, FileMaker Pro (v18.0.3 and Windows 10) shows a message saying "Unable to launch plug-in child process JVM". This is happening for both the Email plugin and the FTPeek plugin.

Hello, I'm troubleshooting an GMail import routine that has worked until now. EmailReadMessages ( "mailbox=INBOX" ; "viewed=false" ; "attachments=true" ; "readonly=false" ) returns "Could not determine date/time format: Could not parse timestamp". This might be related to security changes that Google has made in the background, although I have managed to connect successfully to the server. Thanks in advance for any guidance.

I am migrating from Exchange to O365 and am testing mailit using the supplied EmailClient Filemaker database provided. I get the following error. 530 5.7.57 SMTP; Client was not authenticated to send anonymous mail during MAIL FROM [BN6PR1001CA0036.namprd10.prod.outlook.com] Is this 365 related or plugin related?

I have an email account I’m pulling unread messages from without issue but it has grown to have over 30,000 old messages so I’m trying to write a script to delete the read messages. The issue is that I obviously can’t pull all the read messages at once so I created a set of loops one inside the other, I fetch 200 messages then loop through them and flag them as deleted. Then I fetch another 200 and loop around to delete those. The first 200 get deleted but no more after that. Do I need to disconnect and reconnect before each new fetch?

no object DCH for MIME type multipart/mixed; boundary="----=_Part . . . My email with attachments script has been working fine up to the point I upgraded to FMP18 and/or 360email 3.3. What does it mean and what do I need to do about it? Kyle Putzier

Hi, Could do with some advice please, i am just playing with the cloud mail plugin, i am trying to install the plugin on the server. I have copied both the FMX and FMX64 files to the following location, but it doesn't seem to register the plugin when I open the provided database, instead it asks me to install the plugin locally. C:\Program Files\FileMaker\FileMaker Server\Database Server\Extensions Is this the correct location ? Thanks.

Got the following from my Office 365 tenant today...looks like I will be unable to do "basic" (normal) authenitication for IMAP using the 360Works Email plugin to Office 365 mailboxes starting 10/13/2020. I don't see any mention of OAuth in the current documentation for the Mail plugin, so I'm assuming it doesn't yet exist.... Is 360Works working on adding OAuth functionality to the Email plugin? Thanks, John

Hi I have been using this plugin for sometime without any issues , but for some reason it lately stopped reading the latest emails , when i fetch the 100 more emails it just fetches the ones which are in the database already not bringing me in any more , any solution of what has happened here would be appreciated.

When running PSoS, I thought the attachments would be stored in the temporary folder and removed when the PSoS-session is over. I find that each attachment creates a folder like "[email protected]" in the Documents folder, and it stays there after the session. I tried to make the script remove it, but ran into some problems. Any suggestions?

FileMaker 17 Advanced on Windows 10 - continues to run in the Task Manager after exiting the program. After removing all plugins (360 Works Email, FTPeek, and Base Elements) FM17 will quit and relaunch normally - I ran that routine four or five times without issue. I reintroduced each plugin and retested. 360 Works Email plugin (released on 6/14/18) is causing the issue. It is requiring a CT ALT DELETE to close FM17 before we can relaunch it as it shows it still running. This has been reported by some of the users in my company. Suggestions?

I am trying to register the email plugin (v3.2) in FMPA17 on OSX Sierra. The registration is initially successful (it is an enterprise license), but if I close and reopen filemaker, the plugin is no longer registered. It seems to not be saving, and therefore does not persist after closing filemaker. Has anybody seen this issue before?

I have recently purchased the Email plug-in to use with my FM Starting Point database. I have signed up with AWS and got my account out of sandbox but can't seem to authenticate. I run the script debugger and it gets past the authenticating with 360 works and only has a problem with it try to connect with my AWS SMTP server. Any ideas? Also, I was able to send successfully with SMTP credentials using the FMP Email Client provided.

I'm currently using 360Works Email with FMP17Adv and Airmail (newest build) on Mac10.12.6. Due to bugs in Airmail and a total lack of support, I'm considering switching to Spark. Has anyone used 360Works with Spark? It would be good to hear any comments, good or bad, because it took me quite a while to get everything functioning the way I want with Airmail, and I suspect I'll have to do it all over again with Spark. Thanks.

FileMaker 16 Pro Advanced, connected to FileMaker 16 Server EmailWorks v3.0.8 Yesterday, July 30, 2019, I received an email from G Suite that they are deprecating Less Secure Apps (LSA) in October 2019. Currently, enabling LSA is discussed in the 360Works documentation: ...Gmail also requires that you change the "allow less secure apps" to true in order to connect to it with 3rd party software. This setting can be changed in the Security section in account settings. I went to admin.google.com and found the setting for LSA, turned it off, then enabled 2-factor authentication, created an app specific password, then opened a script that sends an email with P…

Seeing issues where the update for the plug-in doesn't want to install on systems where the user doesn't have Admin Rights to the computer (Windows). Anyone else seeing this?

Having changed nothing on my server or script that has been functioning fine for several months, I'm now getting an error when trying to fetch messages via the EmailReadMessages() function. “java.lang.NumberFormatException: For input string: “null”” The log file says: Jun 26, 2019 2:49:10 PM com.prosc.fmkit.Plugin setLastError SEVERE: PluginFunction PluginFunction{name='EmailReadMessages', minArgs=0, maxArgs=-1} got an error with converted args [[uid=null, mailbox=INBOX, readonly=false, attachmentsAll=true, max=5, progress=true]] I am passing the uid via a $uid variable, and if I Show Custom Dialog in a script step, the $uid variable is indeed set. …

Hello! One of my Macs has gone down and the 360works plugin was registered to that computer. So I suspect this is why I am getting the following errors: 1. inside FM / Preferences / Plugins / 360works / - you must have a network connection when you use this software for the first time 2. when I click a HTML layout button - the error is - 'Error registering 360works. You must have a network connection when you use this software for the first time Does your activation server need to relinquish one of our licenses due to the Mac that has gone down? Many thanks, Jon Bessant certitec.com

Short question - Is there a way to change the Content-Transfer-Encoding when setting the body of an email? Back story - Every week we send an email blast to our folks which is an HTML eCard provided by our podcast provider (VoiceAmerica). We get the eCard as a text file with the HTML code, open the file and put the code into a field. We use EmailSetBody to attach the field to the email as HTML. For almost everyone of the 11,000+ who receive the eCard it opens just fine. But for folks with a gmail.com address, who are using the Gmail web interface, or the iOS Gmail app, the body of the message does not display. Downloading the message as a .eml shows that the HTM…

Hello. What are the things to check if your plugin won't activate on FMServer 17?

I am evaluating 360works email plugin and when getting messages from an office365 server I get the following error "java.lang.ArrayIndexOutOfBoundsException: -99"...If I click OK it reduces to "98" but then increases: I assume its retrieving messages and this is the count. Any ideas?

FMP17 updated this morning, and suddenly it can't send email via Airmail anymore. It reports "Could not convert socket to TLS" Any suggestions? I'm generating PDFs on a Mac 10.12.6, printing the PDF to disk, and then attaching it to an email, all scripted. It's worked perfectly for about two years, including upgrading from FMP13 to FMP17 when 17 was released... Any suggestions, or hopefully remedies, gratefully accepted!

Per 360Works documentation for sending SMS Messages using their plugin, I created an Amazon SES Account and IAM User. I created the Access Keys used by the plugin, and I was successful sending SMS Messages for about 10 days. Abruptly, the ability to send SMS has stopped, and I do not receive any errors in my scriptstep "EmailSMSSend" using the FM Debugger. It appears that FileMaker is able to hand off the message to Amazon, and it dies there. I have tried creating other IAM Users (although the plugin only requires the Access Keys). I have created new Access Keys, with the same failure. Using the Amazon Management Console, I cannot see any errors that I can correct (I find…

Non-documented use of CMQueueMessage We have been adjusting our email structure and looking at how the received emails show in email clients and we noticed that the CloudMail system was simply adding the From address, so it appeared as: [email protected] <email @address.com> in the header. By changing the information being posted to the from address for CMQueueMessage, I have found that you can change the format to appear in the expected form - name <email @address.com>. e.g. fromaddress = "name <email @address.com>"

hi Guys, I am getting an "access denied" error when I use the 360 SMS send command with AWS. I have the correct Key and Secret key installed, and a true phone number. The full text of the error is "com.prosc.aws.exception.AccessDeniedException: AwsRequest{class=class com.prosc.aws.sns.CreateTopic, params={Version+2010-03-31, Action=CreateTopic, Name= (the the phone number here}}: null any ideas?

I've built a system for a client to send html based emails. I'm having a problem that any external email address is rejected by the Send Email function. Looking at the logs I can see the following: I've spoken to the client's IT support who manage their email server and checked all the details used. It appears this is caused by javamail, but we're not sure how to get around this issue. Has anyone had a similar issue, and how did they get around it?

Our office recently replaced a database server and upgraded to FMS17 from FMS16. Now that FMS17 is being used, the Script Engine process terminates abnormally when 2 scheduled scripts using the Email plugin fire-off at the same time. Individually, the scripts run fine. However, run in tandem, they crash FMSE. Any thoughts on why the 360Works Email plugin would allow simultaneous scripts to run in FMS16 but not in FMS17? Server Version is: 17.0.2.203 Plugin Version is: 3.1 Sample Event Logs: 2019-03-21 17:35:00.166 -0600 Information 148 SERVERNAME Schedule "Email Example A" running. 2019-03-21 17:35:00.166 -0600 Information 689 SERVER…

We are have run the EmailSetErrorCapture("true") not command before our email create command but if there is a bad email address, we are getting a "360 works email error" dialog appearance, which for our looping script is causing major issues since a user has to interfere to click the x.

I've set up the 360Works email plugin with AWS and it's working properly. The 'email from' is an approved gmail account which is an address from our domain. The 'reply to' address is the email address for the contact from which we are sending the email so it is different from the 'email from' address. Our user is selecting a number of her contacts to send an email to, then our script loops through the list and send an email to each recipient one at a time. We need the 'reply to' to be the user's email address. When the email is sent to a gmail address it generates a very scary warning for the recipient. Is there any way to avoid this problem? …

I installed the plugin on the server, activated it from admin console but there is no way to get it work. I cannot write an email register step to activate the license as I Filemaker Pro does not provide me the 360 functions in the script/functions editor. How can I bring the plugin to life?

I'm probably missing it...but is there a way to set an email to deliver with the "High Importance" flag?

Hello, OS: 10.12.6 FileMaker: 16.0.5.500 360 Plugin: 3.08 I seem to be having a bit of trouble with the 360 works email plugin, The issue is that when it is enabled in FileMaker plugins the inspector doesn't act as it should for example greying out buttons so that I am unable to select them, when it does allow me to select and change various settings upon switching to browse mode it erases all changes that I have made rather than saving them. Enclosed is a screenshot of the inspector when an object is selected. Any help would be greatly appreciated

We have the 360works CloudMail plug-in employed to send batch emails to our participants. It uploads attachments to AWS and includes a download link on each email, however, some of our city clients are being blocked from accessing the attachments by their firewall. We have the domains all fully certified and verified by AWS, so does anyone have any idea what could be the possible cause of this. Thanks in advance, Anatole Beams

Simple question Will this work, or do we need to upgrade client to Version 3? I don't see anything in the version history to give me any guidance Thanks Tim

Does anyone know how to do this?

A client of ours started yesterday a mail loop. For one mail it went wrong. A person gets a extra mail that was generated for a person that should have get his mail. What I discovered is that person two had a invalid mail address (yes I should check this better in the script) but the mail was send to person one. What I do in the script: ---------------------- - I set a local variable $to to the mail address. - I set the $from, $to, $subject, $body - I do EmailRegister and EmailConnectSMTP Then I do: EmailCreate( $from ; $to ; $subject ) and EmailSetBody( $body; "html" ) and EmailBCCRecipients ( "[email protected]") - I add Attac…

360 Works Email in our environment is running slow, and taking some time for some of our emails to arrive. To be upfront, we do have a lot of activity on our system we use at Relevant Radio throughout the day and the plugin is being called on extensively. However, we only use the plugin for one way communication (order advisories). I am not too sure how to bring some of my scripts over to perform script on server, as many of them rely on layout contexts, attachments and links. I'm pretty sure if I could move some of the demand PSOS it would free up the log jam we experience most every day. Any suggestions on some easy to understand ways to tackle this would be ap…

Hi, I'm demoing a couple of different plugins to bring our email send and receive into our in-house filemaker solution. When testing the 360works demos I can't send via OSX server, we get invalid email address on the Plugin Examples File and when using the Email Client file. I can get IMAP email in but when trying to test the SMTP settings it either hangs or fails.

Using the Email plugin. Emails are not being sent and the error generated is: java.lang.nullPointerException. Database is hosted with FM12. Users get this message with both FM 12 and 13, All are Widows 7. The script used to work - it's a new problem. Any suggestions? Thank you. Nancy Adelman Adelman Databases.com [email protected]

I've been successfully using this plug-in for a while now to send HTML emails from FM I upgraded to 3.1 Workgroup license in July this year. In the last week suddenly we get an error when trying to send : License is for an older product version Nothing has changed in our FM solution. Plug-In appears as enabled: 360Works Email;3.1;Enabled Any ideas?

Attempting to connect to a Office365 shared account. Everything seems to be set up correctly. Connection works find for a normal username email account on 365. Username for the shared account is entered as [email protected]\sharedaccountname which seems to be expected elsewhere with 360works and other places for using shared boxes.. The odd thing, if you change the connection to EmailConnectPOP from EmailConnectIMAP the connection for the shared account works fine and fetches mail. Any ideas to make the IMAP side work?

Can't seem to get the the Email plugin working with Amazon. Here's the script. Taken from your example. The connect with Amazon works. It fails at step 12. No idea what the error is from this message.The From is a verified AWS email account. Thanks, Kurt Bleicken [email protected]

We have been using the email plugin for about a month or so and sometimes it's quite slow. I'm wondering if it's my setup. Here's a basic example of how we'd send a single email. EmailRegister [...] EmailConnectSMTP [...] EmailConnectIMAP [...] EmailCreate [From:FieldA; To:FieldB; Subject:"Text "& FieldC";] EmailSetBodyFile [url:"file:///H:/...template.html"] EmailBodySubstitute [Search String: %%FirstName%%; Replace String: FieldD] EmailBodySubstitute [Search String: %%LastName%%; Replace String: FieldE] EmailBodySubstitute [Search String: %%Salutation%%; Replace String: FieldF] ...etc (usually 8-15 of these) EmailSend EmailMoveCurrentMessage [Folder:…

I downloaded the demo plugin and opened up the Sample Client. I entered an account and tried to connect to our email server running on an OSX server. The email server is Dovecot. I could not get it to connect: The error above was the only thing I was getting. I tried with and without SSL and a variety of ports and both IMAP och POP3. The only thing resulting in a slightly different response was connecting on port 110 with no SSL: Still nothing is being fetched and I am getting nowhere. I can't find any information on which login methods is supported by the plugin. We are currently using Dacons Mailit and it's working "OK". I'd like to evaluate …

Description problem: when we enable a script on the server that uses the 360works Email plugin, after some time (sometimes a couple of hours, sometimes more than a day) the script engine crashes. When this script is disabled, the script engine runs smoothly. Technical specifications: Mac mini server macOS Sierra FileMaker Server 15v3 360works Email plugin v3.1 If you wish, I can send the logs. Thanks for your help!

I have been using the new SMS service via AWS and am pretty happy with it - when sending to 10 or so recipients. But, I need to be able to send to about 500 - 600 at one time. I am getting the following error message: (Invalid parameter: Topic Name) -- I can find no place to do anything with the Topic Name. What to do? I could, I suppose, change the script to loop through and send individual texts -- but I was hoping that wouldn't be necessary. I will try this and see how long it takes with a list of around 300 or so.

Hi When sending email from my filemaker solution using email 360 , email appears as plain text with out any formatting alll mushed together even when in my solution it is formatted , how do i rectify /apply formatting to that?

Me again, sorry. This is an altered (I just altered attachments to be true) copy of the script in the demofile: EmailReadMessages( "progress=" & EmailPlugin::Progress Bar; "progressLocation=" & EmailPlugin::Progress Location; "mailbox=INBOX" ; "attachments=true" ; "skip=" & EmailPlugin::Skip ; "max=" & EmailPlugin::Max Fetch ; "readonly=true" ; /* setting readonly to false will mark any fetched messages as viewed! */ ) My question is how to write in the same script that I want the messages in INBOX.Sent Items and INBOX.Sendt post as well?

encrypted with RMail. I get the path to the attachment (.....\Local\Temp\[email protected]\Kadim Sahin.pdf) but when I try to pass it into a container I get ERROR. Not everytime, only sometimes. I am using EmailReadAttachment. When I open the email in Thunderbird or Outlook I can clik on the enclosed document Kadim Sahin.pdf and open (and/or download) it without any issue/error. Anyone familiar with RMail and this issue? Thank you in advance Best regards, Dorthe

So I downloaded the 360Works Email plugin 3.08. The Inbound Host is imap.one.com and the port should be 993. I have typed these information: imap.one.com:993. Problem/issue: I keep getting this errormessage: Unknown Error:-1. I know for sure that these settings combined with the ones I have put in Inbound Username and Inbound Password works with Mozilla Thunderbird and Outlook 2016. However the settings in these are SLL/TLS as well. I can not choose SLL/TLS with the email-plugin, so I have tried every possible alternative from none selected to all possible selected without any luck. I keep getting the same error. And yes, I have also tried using other portnumber…

1. Is it possible to set up another Temp-standard location for recieving emails (and the enclosed attachments)? 2. Is it possible to make the plugin recieve the attachments in a repeating field (one by one) in stead of all in one text field? This would make it possible to auto get the repeating field to correspond with a repeating calculated containerfield; or in other words getting the attachment into the container field directly as far as the user can tell.

Anyone have code for attaching a file to a CloudMail email? I believe the file needs to be parked on AWS but I don't know how to set this up.

Can someone refer me to some code examples on how to include .png files in an email originating in Cloudmail.

Hi , i am in the process of intergrating the 360works email plugin into my solution , working great so far, for one issue , every couple of emails sent out of the solution fails , i get an error message as below Any ideas why this happens , i have tested the outgoing server many times and that works great , what does this error mean , i would appreciate if someone could help me out on this , i would want it all working before i go ahead and purchase the license.

Hi i tried opening the 360's works email plugin but get an error message as below , any idea why this happened and how i can initialize this?

All of a sudden my emails are not working this morning and after trying to figure out a fix I went to my hosting site. I've found a support message stating that as of yesterday... All shared servers will support TLS 1.2 only by 1st of July Older versions of e-mail clients and web browsers might not support the latest TLS. In case your e-mail client stopped working, please update it to the latest version. So I'm guessing the email plugin doesn't support this? Is there ANY way I can fix this?

I just downloaded a trial version of 360Works Email plugin 3.1. I'm looking at it to replace Dacons MailIt. On launch of FileMaker Pro Advanced (16.0.5) on Mac Sierra 10.12.6 (16G1408) a box comes up that says, "Please Wait" as the title, and the message "Preparing plug-ins for first use" with a progress bar. The percentage very slowly increases. I went to lunch, and when I came back, it was only up to 23%, so I did a force-quit of FileMaker (there isn't a Quit menu item). I removed the plugin and relaunched FileMaker, and all is normal. I quit and put the plugin back in Extensions, and the same "Please Wait" box came up. As I've typed this, the percentage is st…

Working with your new SMS via AWS and it is working fine -- but, I have set a default sender ID in my AWS account but it doesn't use it -- the texts are sent simply from a number that I don't recognize. How can I specify a sender name. The AWS documentation says the default can be overridden so I am wondering if the plug-in is overriding my default? Thanks for the help, Martie

Is it possible to use the Email plugin version 2.17 on Mac OS 10.13 with Filemaker Server 17? Or needs the client upgrade to version 3?

Filemaker Server 16.0.2 Filemaker Pro Advanced: 15.0.4 360works Plugin: 3.08 My client has recently switched to Office 365, and our very reliable 360Works-based email has stopped working. Connection String; EmailConnectSMTP($server ;$account ; $pword;"tls=0") // $server, $account, and $pword are all correct getting this response: <screenshot omitted> KInd of stuck here. help would be appreciated

We just moved to a new server running FMS16. Windows, hosted on AWS. I installed the email plugin (v3.04) on the server and enabled it. It works fine when using FileMaker client running locally. When I try to run use the plugin either in a PSOS script or from WebD (local or PSOS) it hangs the server. I have verified that Java 8 v131 is installed on the server, the plugin is installed and enabled on the server. If I show a dialog with get(installedFMPlugins) it shows 360Works email v3.04 is installed and enabled. The script with the plugin fails right at the first step (registration) or if I remove that at the Connect step. I know this isn't a l…